International Calling For Trs Types - Panasonic DBS 824 Installation Manual

FF7
International Calling For TRS Types 3-6
International Calling For TRS Types 3-6
Software Version:
CPC-S
and
CPC-M,
Version 1 .O and higher
Address: FF7 l# l# (0 or l)#
Description
Use this program to set system-wide restrictions for the dialing of
international calls on trunks assigned TRS types 3-6.
If the DBS 824 system is programmed to use the new NANP dialing plan
(FF7 l# 16# l#), this "International Calling For TRS Types 3-6" program
determines whether the system will check the Country Code Table for any
restrictions on the dialed number.
If the DBS 824 system is programmed to use the old dialing plan (FF7 l#
16## O#), this "International Calling For TRS Types 3-6" program determines
whether international calling is allowed or restricted system-wide.
This program only applies to those trunks that are assigned TRS types 3-6.
International calls are always restricted for TRS types 1 and 2 -- and always
allowed for TRS type 7.
Programming
I
FF7 l# l# (0 or l)#
t
Old Dialing Plan:
OrInternational calls are restricted.
1 =Intemational calls are permitted.
New Dialing Plan (NANP):
O=System will check Country Code Table
for restrictions. -
l=System will not check Country Code
Table for restrictions (all international
calls are allowed).
Related Programming
Dialing Plan Switch: FF7 l# 16## (0 or l)#
Country Code Table: FF7 l# 19# (Table)# (Code)#
Override Toll Restrictions with SSD Numbers: FFl 2# l# 4## (SSD)##
System Installation Area Code: FFl 2# l# 17# (0 or l)#
issued 3/l /95
DBS 824-l O-400 7-5