General System Settings; Call Duration Display - Panasonic DBS 824 Installation Manual

FFl
Call Duration Display
General System Settings
Call Duration Display
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFI 2# 1# l# (0 or l)#
Description
The duration timing for outgoing CO calls is normally displayed on
telephones with LCDs. The DBS 824 can be programmed so that the call
duration time is not displayed.
NOTE:
This setting does not affect SMDR recording of the call.
Programming
FFl 2# I# l# (0 orl)#
t-
O=Call duration is not displayed.
l=Call duration is displayed.
Related Programming
Call Duration Timer: FFl 2# 1# 32# (0, 1 or 2)#
Issued 3/l /95
DBS 824-l O-400
Page l-5