Dial "0" For Attendant - Panasonic DBS 824 Installation Manual

Dial
"0"
for Attendant
Key Telephone Features
Dial "0" for Attendant
. .
(CPC-S and CPC-M)
Description
The Attendant can be called from any extension by simply pressing "0."
If multiple attendants are assigned, a dial "0" call goes to the first Attendant
first. If the first attendant is busy, the call goes to the second Attendant. The
call will continue to transfer to the next attendant in the attendant group if
necessary.
Up to four attendants can be assigned.
Operation
1. Pick up the handset or press ON/OFF.
The phone issues intercom dial tone.
2. Press "0."
l
"Talk-EXT 100" appears on the display if your extension is set for
Voice Calling.
l
"Call-EXT XXX' (where "XXX" is the extension) appears on the
display if your extension is set for Tone Calling.
Related Programming
l
FFL (System): Second Attendant Position
l
FFl (System): Third Attendant Position
l
FFl (System): Fourth Attendant Position
l
FFl (System): Attendant Transfer Extension
l
FF6 (Names and Messages): Extension Name
Considerations
l
If the Attendant's name has been stored it appears on the display instead of
the extension number.
.
3-34
DBS 824-l O-700
Issued 3/l 195