Field Service Ver. 8.0 Jun. 2008
3.5.15
Replacing the manual bypass tray feed roller/manual bypass tray pick-up
roller
A. Periodically replaced parts/cycle
• Manual bypass tray feed roller: Every 300,000 prints
• Manual bypass tray pick-up roller: Every 300,000 prints
B. Procedure
1. Remove the manual bypass tray separation roller assy.
See the replacement procedures 1 to 2 in "Manual bypass tray separation role assy."
See P.47
[1]
[1]
[1] [2] [3]
[1]
[2]
A00JF2C038DA
[2]
[1]
A00JF2C039DA
A00JF2C040DA
3. Periodical check
2. Remove two screws [1], and remove
the manual bypass tray upper cover
[2].
3. Remove two screws [1], and remove
the manual bypass tray feed roller
cover [2].
4. Remove two C-clips [1] and two
bearings [2].
5. Remove the spring [3], and remove
the feed roller/pick-up roller assy [4].
45