Administrator Mode; System Tab; System Settings - Measurement Unit Setting; System Settings - Paper Tray Setting - Konica Minolta bizhub c200 User Manual

Assistant tool for C200
3.4

Administrator mode

The procedure for using the menu that appears on the left side of the main Administrator mode page is
described below.
3.4.1

System tab

From the System tab, settings concerning the system configuration of this machine can be specified.

System Settings - Measurement Unit Setting

Specify the basic unit of measure used with this machine.
Item
Measurement Unit
Setting

System Settings - Paper Tray Setting

Specify the settings concerning the paper trays.
Item
Priority Tray
Auto Tray Switch
ON/OFF
Note
"Tray 2", "Tray 3", "Tray 4", "LCT" and "Bypass Tray" are available only if the corresponding option has
been installed.
C200
Description
Select from "mm (Numerical Value)", "Inch (Num. Value)" and "Inch (Franction)"
Description
Select the paper tray to be given priority ("Tray 1", "Tray 2", "Tray 3", "Tray 4", "LCT" and "By-
pass Tray").
Select whether ("Allow") or not ("Restrict") the machine automatically switches between the
paper trays.
3
3-26