Initial Setting - Konica Minolta bizhub 750 User Manual

12
Copy Initial Screen Setting
Description
Specify the default display for the Basic screen in Copy mode.
• TYPE1:
Buttons for selecting functions and the current settings are dis-
played in the Basic screen.
• TYPE2:
Some buttons for selecting functions are displayed in the Basic
screen, and the current settings are highlighted.
Job List Default
Description
Select the job list displayed as the default in the Job List screen.
• Current Print Jobs:
The Current Jobs list appears on the Print tab.
• Print Job History:
The Job History list appears on the Print tab.

Initial Setting

Description
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on (the pow-
er switch is set to "n") or the [Reset] key is pressed can be specified.
• Current Setting:
The settings specified from the touch panel before Utility mode
was entered are set as the default settings for Copy mode.
• Factory Default:
The factory default settings are set as the default settings for
Copy mode.
Reminder
To change the default settings for Scan mode, press the [Scan] key, enter
Utility mode, and then select a setting for this parameter.
!
Detail
For details on the default settings and the factory default settings, refer
to "Automatically Canceling the Settings (Automatic Panel Reset)" on
page 2-29.
12-24
Utility
Settings (Default set-
tings are underlined.)
TYPE1/ TYPE2
Settings (Default set-
tings are underlined.)
Current Print Jobs/ Print
Job History
Settings (Default set-
tings are underlined.)
Current Setting/ Factory
Default
bizhub 750/600