Copy Setting; Reset Setting; Initial Setting - Konica Minolta BizHub Pro 1050 User Manual

03 Copy Setting

01 Reset Setting

Set the copying condition as desired when the machine is reset. Also select whether
to reset the machine or not when inserting a key counter or a copy card under the
following reset conditions.
Resetting the machine:
• when the power is turned off
• when Auto Reset is on
• when Power Save is on
• when copying becomes available by entering the password when User
Authentication/Section Authentication is on
• when a key counter or a copy card is inserted
• when pressing [Reset] on the control panel

01 Initial Setting

Besides the factory default setting (Full Auto), you may set the copying condition as
the initial setting as desired.
Full Auto copying condition:
• Original Setting: standard
• Special Image: standard
• Auto Zoom: On
• Zoom: 1.000
• Output Application: See "02 Reset Function Setting"
• Copy Mode: 1-1
• Auto Paper Select: On
• Rotation: On
• ADF: On
4-19