Utility mode
11.2
Initial setting
Set the default of the fax function.
It is possible to set a fax function that is selected when the main power is
turned on or when [Reset] is pressed.
For this setting, display the fax screen and press the [Utility/Counter] on this
screen.
Reminder
If the [Utility/Counter] key was pressed to register items and specify
settings, be sure to press the [Reset] key in the control panel after
returning to the standby screen (initial screen).
Initial setting
1
Press [Utility/Counter].
The Utility/Counter screen appears.
2
Press [User Setting].
3
Press [User's Choice].
The User's Choice screen appears.
bizhub 362/282/222
11
11-13