Dell Networking 2024 Reference Manual page 201

Table 2-5. Navigating CLI Command Modes
Command Mode
Router OSPFv3
Config
IPv6 DHCP Pool
Mode
Interface Configuration Modes
Gigabit Ethernet From Global
10 Gigabit
Ethernet
Access Method
From Global
Configuration
mode, use the ipv6
router ospf
command.
From Global
Configuration
mode, use the ipv6
dhcp pool
command.
Configuration
mode, use the
interface
gigabitethernet
command. Or, use
the abbreviation
interface gi.
From Global
Configuration
mode, use the
interface
tengigabitethernet
command. Or, use
the abbreviation
interface te.
(continued)
Command Prompt
console(config-rtr)#
console(config-dhcp6s-
pool)#
console (config-if-
unit/slot/port
Gi #
console (config-if-
unit/slot/port
Te #
Exit or Access
Previous Mode
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Using the CLI
201