Table 189 Maintenance > Logs > Log Setting > Active Log Summary - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide
The following table describes the fields in this screen.
Table 189 Maintenance > Logs > Log Setting > Active Log Summary
LABEL
Active Log
Summary
Log Category This field displays each category of messages. It is the same value used in the
Selection
OK
Cancel
536
DESCRIPTION
Display and Category fields in the View Log tab. The Default category includes
debugging messages generated by open source software.
Select what information you want to log from each Log Category (except All Logs;
see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - log regular information and alerts from
this category
enable all logs (yellow checkmark) - log regular information, alerts, and debugging
information from this category
If you check one of the check boxes for All Logs, it affects the settings for every
category.
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
Chapter 36 Logs