The Shell Script Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

Table 265 Maintenance > File Manager > Firmware Package (continued)
LABEL
Don't Reboot
File Path
Browse...
Upload
After you see the Firmware Upload in Process screen, wait a few minutes before logging into the
USG again.
Figure 431 Firmware Upload In Process
Note: The USG automatically reboots after a successful upload.
The USG automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 432 Network
After five minutes, log in again and check your new firmware version in the Dashboard screen.
If the upload was not successful, the following message appears in the status bar at the bottom of
the screen.
Figure 433 Firmware Upload Error

32.4 The Shell Script Screen

Use shell script files to have the USG use commands that you specify. Use a text editor to create the
shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the
Shell Script screen to store, name, download, upload and run shell script files. You can store
multiple shell script files on the USG at the same time.
Chapter 32 File Manager
DESCRIPTION
If you choose Don't Reboot, then the firmware upload to Standby system space will be
the Standby firmware after you click Upload and the upload process completes.
If you want the Standby firmware to be the Running firmware, then select the Standby
firmware row in Firmware Status and click Reboot Now.
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take a few minutes.
USG20(W)-VPN Series User's Guide
613