The Shell Script Screen; Figure 539 Network Temporarily Disconnected; Figure 540 Firmware Upload Error; Figure 541 Maintenance > File Manager > Shell Script - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 45 File Manager
The ZyWALL automatically reboots after a successful upload.
The ZyWALL automatically restarts causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.

Figure 539 Network Temporarily Disconnected

After five minutes, log in again and check your new firmware version in the HOME screen.
If the upload was not successful, the following message appears in the status bar at the bottom
of the screen.

Figure 540 Firmware Upload Error

45.4 The Shell Script Screen

Use shell script files to have the ZyWALL use commands that you specify. Use a text editor to
create the shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the
Shell Script screen to store, name, download, upload and run shell script files. You can store
multiple shell script files on the ZyWALL at the same time.
You should include
command, the changes will be lost when the ZyWALL restarts. You
write
could use multiple
Figure 541 Maintenance > File Manager > Shell Script
722
commands in your scripts. If you do not use the
write
commands in a long script.
write
ZyWALL USG 100/200 Series User's Guide