Figure 3-7 Internet Access Setup (Pptp); Table 3-7 New Fields In Menu 4 (Pptp) Screen - ZyXEL Communications Prestige 314 User Manual

The P314 supports one PPTP server connection at any given time.
3.3.3 Configure PPTP Client
To configure a PPTP client, you must configure My Login and Password fields for PPP connection and
PPTP parameters for PPTP connection.
After configuring the User Name and Password for PPP connection, press [SPACE BAR] in the
Encapsulation field in Menu 4 -Internet Access Setup to choose PPTP as your encapsulation option.
If you choose PPTP in menu 4 you will see the next screen.
ISP's Name= ChangeMe
Encapsulation= PPTP
IP Address Assignment= Dynamic
Network Address Translation = SUA Only
The following table contains instructions about the new fields when you choose PPTP in the Encapsulation
field in menu 4.
FIELD
Encapsulation
Idle Timeout
Internet Access
Prestige 314 Broadband Sharing Gateway with 4-Port Switch
Menu 4 - Internet Access Setup
Service Type= N/A
My Login=
My Password= ******
Idle Timeout= 300
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 3-7 Internet Access Setup (PPTP)

Table 3-7 New Fields in Menu 4 (PPTP) screen

Press the [SPACE BAR] and then press [ENTER] to choose
PPTP. The encapsulation method influences your choices for
IP Address.
This value specifies the time in seconds that elapses before
the Prestige automatically disconnects from the PPTP server.
DESCRIPTION EXAMPLE
PPTP
300
(default)
3-11