Static Dhcp Add/Edit; Ip/Mac Binding Exempt List - ZyXEL Communications UAG5100 User Manual

Table 95 Configuration > Network > IP/MAC Binding > Summary > Edit (continued)
LABEL
MAC Address
Description
OK
Cancel

21.2.2 Static DHCP Add/Edit

In the Configuration > Network > IP/MAC Binding > Summary > Edit screen, click the Add
icon or select an entry and click the Edit icon to open the following screen. Use this screen to
configure an interface's IP to MAC address binding settings.
Figure 143 Configuration > Network > IP/MAC Binding > Summary > Edit > Add
The following table describes the labels in this screen.
Table 96 Configuration > Network > IP/MAC Binding > Summary > Edit > Add/Edit
LABEL
Interface Name
IP Address
MAC Address
Description
OK
Cancel

21.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the UAG
does not apply IP/MAC binding.
Chapter 21 IP/MAC Binding
DESCRIPTION
This is the MAC address of the device to which the UAG assigns the entry's IP address.
This helps identify the entry.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving.
DESCRIPTION
This field displays the name of the interface within the UAG and the interface's IP address
and subnet mask.
Enter the IP address that the UAG is to assign to a device with the entry's MAC address.
Enter the MAC address of the device to which the UAG assigns the entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For example, you
may want to list the computer's owner.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving.
UAG5100 User's Guide
217