The Virtual Server Add/Edit Screen; Figure 214 Network > Virtual Server > Edit; Table 105 Network > Virtual Server > Edit - ZyXEL Communications ZyWALL USG 100 Series User Manual

Table 104 Network > Virtual Server (continued)
LABEL
Add icon
Apply
Reset

16.2.1 The Virtual Server Add/Edit Screen

The Virtual Server Add/Edit screen lets you create new virtual servers and edit existing
ones. To open this window, open the Virtual Server summary screen. (See
page 312.) Then, click on an Add icon or Edit icon to open the following screen.
Figure 214 Network > Virtual Server > Edit
The following table describes the labels in this screen.
Table 105 Network > Virtual Server > Edit
LABEL
Enable
Rule Name
Incoming
Interface
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
This column provides icons to add, edit, and remove virtual servers. In addition, you
can activate and deactivate virtual servers.
To add a virtual server, click the Add icon at the top of the column. The Virtual
Server Add/Edit screen appears.
To activate / deactivate a virtual server, click the Active icon next to the virtual
server.
To edit a virtual server, click the Edit icon next to the virtual server. The Virtual
Server Add/Edit screen appears.
To delete a virtual server, click on the Remove icon next to the virtual server. The
web configurator confirms that you want to delete it before doing so.
Click this button to save your changes to the ZyWALL.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Use this option to turn the virtual server on or off.
Type in the name of the virtual server. The name is used to refer to the virtual
server. You may use 1-31 alphanumeric characters, underscores(
but the first character cannot be a number. This value is case-sensitive.
Select the interface on which packets for the virtual server must be received. It can
be an Ethernet, VLAN, bridge, or PPPoE/PPTP interface.
Chapter 16 Virtual Servers
Section 16.2 on
_ ), or dashes (-),
313