Srx550 Services Gateway Front Panel - Juniper SRX550 Hardware Manual

The services gateway must be connected to earth ground during normal operation. The protective earthing
terminal on the side of the chassis is provided to connect the services gateway to ground. Additional
grounding is provided to an AC-powered services gateway when you plug its power supply into a grounded
AC power receptacle.
RELATED DOCUMENTATION
SRX550 Services Gateway Description | 2

SRX550 Services Gateway Front Panel | 15

SRX550 Services Gateway Back Panel | 22
Grounding the SRX550 Services Gateway | 77
General Electrical Safety Guidelines and Warnings
SRX550 Services Gateway Front Panel
Figure 2 on page 15 shows the front panel of the SRX550 Services Gateway.
Figure 2: SRX550 Services Gateway Front Panel
1 2 3 4
8 9 10 11 12
Table 6 on page 15 provides information about the front panel components of the services gateway with
reference to Figure 2 on page
Table 6: SRX550 Services Gateway Front Panel Components
Number Component
1 Front panel LEDs
5 6
13
15.
Location
Left side of the
front chassis
panel
7
Description
Indicate the current status of the services gateway. See
"SRX550 Services Gateway Front Panel LEDs" on
page 19 for detailed information about the front panel
LEDs.
15