Avaya G250 Administration page 519

30. Use the username command to define new additional operators for Crypto-officer, User,
and Read-Only User roles, as required.
G350-N(super)# username admin password admin_password access-type admin
User account added
G350-N(super)# username readwrite password rw_password access-type
read-write
User account added
G350-N(super)# username readonly password ro_password access-type
read-only
User account added
31. Use the show username command to verify successful definition of CLI users.
G350-N(super)# show username
User
account
--------------------------------
root
admin
readwrite
readonly
32. Remove unnecessary OSPF peers.
a. Use the show ip ospf interfaces to list all interfaces with OSPF activated.
b. If there are interfaces with OSPF activated, use the no ip ospf
message-digest-key command to delete the OSPF MD5 key in the context of the
interface.
33. Configure primary and secondary RADIUS servers.
G350-N(super)# Set radius authentication enable
Done!
G350-N(super)# set radius authentication server 200.200.200.20 primary
Done!
G350-N(super)# set radius authentication secret fips_test1
Done!
34. Configure the OSPF router peers.
Access Account
level type
----------- ----------
admin local
admin local
read-write local
read-only local
Administration procedures
Active Authent.
method
------ ----------
yes password
yes password
yes password
yes password
Issue 1.1 June 2005 519