Avaya G250 Administration page 164

Configuring WAN interfaces
Table 8: Modem dial backup logging messages (continued)
Log Message
Dialer 1 Modem
is not ready
Console Messages - Messages generated by a serial modem attached to the console
port
Modem cable
detected. port
speed <speed>
baud.
Modem Detection
Failed
Modem Ready
164 Administration for the Avaya G250 and Avaya G350 Media Gateways
Severity Possible cause
Warning This message is generated
when the Dialer interface has
been triggered and the
operational state of the dialer is
up, but the dialer is unable to
communicate with the modem.
Informational When a modem cable is
determined to be connected to
the serial port, a message is
generated indicating the
successful connection of the
modem cable and advertising
the capabilities of the serial port
for potential modem
connections.
Warning This message is generated
when a modem cable is
connected to the serial port, but
no modem is detected. This
message is generated every 30
minutes until the modem is
detected.
Informational When the modem is discovered
by the device and the
initialization string is successful,
a message is generated
indicating that the device is
ready to dial.
Action
Troubleshooting steps:
Check modem
●
cable
connection to
serial port.
Check modem
●
cable
connection to
modem.
Check power to
●
modem.
None required.
Troubleshooting steps:
Check modem
●
cable
connection to
modem.
Ensure that
●
modem is
powered on.
Check modem
●
lights for an
alarm.
None required.
3 of 6