Avaya G250 Administration page 265

Table 14: Trap output fields (continued)
Label Description
The number of traps that were dropped by the trap
13
rate limiter since the application was enabled. This
item can be used, when analyzing received traps
logs, to identify missing traps (due to network
conditions or the rate limiter). This is also displayed
by the show rtp-stat summary command.
The number of times the application sampled the
14
VoIP engine (RTP receiver) statistics.
The total number of received RTCP packets.
15
The total number of received RTP packets.
16
The codec used for the session.
17
The codec packet size, in bytes.
18
The encryption method.
19
The received silence suppression method.
20
The transmitted silence suppression method.
21
The average of all codec loss values sampled
22
during the session.
The codec loss event counter.
23
The average of all codec round trip time values
24
sampled during the session.
The codec round trip time event counter.
25
The percentage contribution of jitter-buffer
26
underruns to the average codec loss.
The percentage contribution of jitter-buffer overruns
27
to the average codec loss.
The average of all network RTP packet loss values
28
sampled during the session.
The network RTP packet loss event counter.
29
The average of all network RTT values during the
30
session.
The network RTT event counter.
31
Configuring and analyzing RTP statistics
From the trap example
12
Traps{24/0
Stats{S 54
Stats{S 54 RTCP 54
9236}
Stats{S 54 RTCP 54 RX
15
9236 }
g723
62B
encryptionOff
SSup disabled
SSup disabled/disabled
21
Loss 0.1%
Loss 0.1% #1
23
RTT 570mS
RTT 570mS #38
25
Jbuf 0.1%
Jbuf 0.1%/0.0%
27
Loss 0.0%
Loss 0.0% #0
29
RTT 376mS
RTT 376mS #38
Issue 1.1 June 2005
}
14
RX
19
/disabled
20
#1
22
#38
24
/0.0%
26
#0
28
#38
30
2 of 3
265