Avaya G250 Administration page 68

Basic device configuration
7. Optionally, configure the number of DNS query retries, using the ip domain retry
command. The default value is 2.
G350-001(config)# ip domain retry 4
Done!
8. Optionally, configure the timeout for a DNS query using the ip domain timeout
command. The default value is 3 seconds.
G350-001(config)# ip domain timeout 4
Done!
9. The DNS Resolver is enabled by default. If it was disabled and you wish to re-enable it, use
the ip domain lookup command.
G350-001(config)# ip domain lookup
Done!
!
Important:
If either DHCP Client or PPP are configured in the G250/G350, you need not
Important:
configure DNS Resolver at all, because:
- DNS Resolver is enabled by default, and
- DHCP Client and PPP discover DNS servers automatically, so the list of DNS
servers will include the automatically-learned DNS servers.
All you need to do is:
- For DHCP Client, enable DHCP Client by using the ip address dhcp command.
For information about DHCP Client see
- For PPP, enable automatic discovery of DNS servers using the ppp ipcp dns
request command.
Figure 4 illustrates the workflow for configuring DNS Resolver.
68 Administration for the Avaya G250 and Avaya G350 Media Gateways
Configuring DHCP client on page 95.