Avaya G250 Administration page 190

Configuring WAN interfaces
VLAN interface configuration:
●
G350-001# interface Vlan 1
G350-001(if:Vlan 1)# ip address 149.49.54.24
Done!
G350-001(if:Vlan 1)# exit
G350-001# interface Vlan 2
G350-001(if:Vlan 2)# ip address 11.11.11.1 24
Done!
G350-001(if:Vlan 2)# exit
Serial interface configuration:
●
G350-001# interface Serial 5/1
G350-001(if:Serial 5/1)# ip address 2.2.2.1 24
G350-001(if:Serial 5/1)# mtu 300
Note:
Some LAN data applications do not support fragmented packets. In this case, do
Note:
not change the MTU from its default of 1500.
G350-001(if:Serial 5/1)# bandwidth 128
VoIP configuration:
●
G350-001(if:Serial 5/1)# ip rtp header-compression
G350-001(if:Serial 5/1)# ip rtp compression-connections 20 (4)
G350-001(if:Serial 5/1)# ip rtp port-range 2048 3028
G350-001(if:Serial 5/1)# exit
Static routes configuration:
●
G350-001# ip default-gateway 5/1
* Description of footnoted commands (also applies to identical stages
in configuring Site B):
(1) At this stage you apply Priority 7 to Voice Control traffic.
(2) At this stage you apply Priority 6 to RTP traffic.
(3) At this stage you apply maximum trust between 802.1p priority and DSCP.
(4) At this stage the number of connections (20) depends on the number of phones.
(5) At this stage you are matching the RTP port range to that of the G350.
(6) At this stage the default queue size is 6, and since RTP is enabled you can double the VoIP
queue size.
190 Administration for the Avaya G250 and Avaya G350 Media Gateways
(5)