Avaya G250 Administration page 252

Media gateway
Hide thumbs Also See for G250:
Table of Contents

Advertisement

Configuring monitoring applications
To enable QoS traps:
1. View the RTP statistic thresholds and modify their configurations as necessary. See
Viewing RTP statistics thresholds
page 248.
2. If you need to modify the minimum statistic window, use the rtp-stat min-stat-win
command. For example:
G350-001(super)# rtp-stat min-stat-win 50
Done!
The minimum statistic window is the minimum number of observed RTP sequence
increments for which the application evaluates packet loss. The VoIP engine evaluates the
current received packet loss every RTCP interval. The VoIP engine postpones loss
estimation to the next interval if the number of received packets is less than the minimum
statistic window. By modifying the minimum statistic window, you can prevent the
application from generating loss-events based on too few packets and safely configure a
low packet loss threshold.
3. To configure an additional trap destination, such as an external trap manager, use the
command snmp-server host. For example:
G350-001(super)# snmp-server host 136.9.71.47 traps v1 public
Note:
When using the snmp-server host command, you can specify only to send
Note:
certain types of traps to the specified trap manager. For example, snmp-server
host 1.1.1.1 traps v1 public rtp-stat-qos rtp-stats-faults
configures only QoS traps and QoS fault and clear traps to be sent to host
1.1.1.1.
To check your current SNMP configurations, use the show snmp command. Traps are
automatically sent to the active MGC by the dynamic trap manager feature. To configure the
dynamic trap manager, use the command snmp-server dynamic-trap-manager. For
more information about the dynamic trap manager, see
manager
4. Use the rtp-stat qos-trap command to enable the traps, if not enabled already. For
example:
G350-001# rtp-stat qos-trap
The RTP statistics QoS trap is enabled
QoS traps are now enabled.
252 Administration for the Avaya G250 and Avaya G350 Media Gateways
on page 212.
on page 246 and
Configuring RTP statistics thresholds
Configuring dynamic trap
on

Advertisement

Table of Contents
loading

This manual is also suitable for:

G350

Table of Contents