Viewing The Capture List; Applying A Capture List - Avaya G250 Administration

Viewing the capture list

Use the show ip capture-list command to display the capture list in an easy-to-read
format. For example:
G350-001# show ip capture-list 511
Index Name
----- ------------------------------- --------------------------
511 list #511
Index Protocol
DSCP
----- -------- --- ---------------- --------------- ------------ -------------
10 tcp
Any
15 tcp
Any
20 tcp
Any
30 Any
Any
Deflt Any
Any
Index Name
----- -------------------- ------------
0 Capture
1 No-Capture

Applying a capture list

To apply a capture list, use the capture filter-group command from the general context.
For example, to set the G250/G350 to use capture list 511 on interfaces in which packet sniffing
is enabled, specify the following command:
G350-001(super)# capture filter-group 511
Done!
G350-001(super)#
If no capture list is applied, the packet sniffing service captures all packets.
IP
Src Any
Dst Any
Src Any
Dst Any
Src 135.122.50.171
Dst 135.122.50.128
Src 135.122.50.128
Dst 135.122.50.171
Src Any
Dst Any
Trust
No
No
Configuring and analyzing packet sniffing
Owner
other
Wildcard Port
Any
eq Telnet
eq Telnet
Any
Host Any
0.0.0.31 Any
0.0.0.31 Any
Host Any
Any
Any
Operation
No-Capture
No-Capture
Capture
No-Capture
Issue 1.1 June 2005 291