Avaya G250 Administration page 165

Table 8: Modem dial backup logging messages (continued)
Log Message
Init string error
Modem cable
unplugged
Connection
established
USB Modem Messages - Messages generated by a USB modem (G350 only)
USB modem was
detected
USB modem -
Connection
established
USB modem -
Unplugged
Severity Possible cause
Warning This message is generated
when the USB modem attempts
to dial and has an incorrect
initialization string. The attempt
to dial fails.
Warning. This message is generated
when a Dialer interface is
defined, but no modem cable is
detected as being connected to
the serial port.
Informational When the modem successfully
connects to a remote modem
and a PPP session is fully
established, a message is sent
indicating that the PPP is ready
to transmit and receive traffic.
Informational When the USB modem is
discovered by the device and
the initialization string is
successful, a message is
generated indicating that the
device is ready to dial.
Informational When the USB modem
successfully connects to a
remote modem and a PPP
session is fully established, a
message is sent indicating that
the PPP is ready to transmit and
receive traffic.
Warning This message is generated
when a modem cable is
connected to the USB port, but
no modem is detected.
Modem dial backup
Action
Troubleshooting steps:
Check modem
●
configuration for
proper
initialization
string.
Troubleshooting steps:
Check modem
●
cable
connection to
serial port and
reseat cable if
necessary.
None required.
None required.
None required.
Troubleshooting steps:
Check modem
●
cable
connection to
modem and to
USB port and
reseat if
necessary.
4 of 6
Issue 1.1 June 2005 165