Avaya G250 Administration page 261

Table 13: Detailed CLI output per RTP session (continued)
Field
Duplicates
Seq-Fall
DSCP
L2Pri
RTCP
Transmitted-RTP:
VLAN
DSCP
L2Pri
RTCP
Remote-Statistics:
(Remote-Statistics items are calculated and evaluated upon reception of RTCP messages)
Loss
rem-loss%
#rem-loss-ev
Label Description
This counter increments each time two
45
consecutive RTP packets with the
sample RTP sequence number are
received. A large number of duplicates
may indicate problems in the Layer2/
Ethernet topology (for example, loops).
This counter increments each time an
46
RTP packet with a sequence number
less than the last known sequence is
received. Packet resequencing may be
caused by switching to a backup WAN
interface or route flaps.
The last received DSCP value of the
47
RTP packets.
The last received L2 priority value of an
48
RTP packet (usually IEEE802.1p).
The total number of received RTCP
49
packets.
The VLAN-ID on which the RTP
50
packets are transmitted.
The DSCP of RTP packets.
51
The Layer 2 priority of transmitted RTP
52
packets (usually 802.1p).
The total number of transmitted RTCP
53
packets.
The network loss experienced by the
54
remote RTP receiver. The local RTP
receiver learns about its remote peer
statistics from RTCP packets.
The number of samples that were over
55
the rem-loss threshold.
Configuring and analyzing RTP statistics
From the CLI
example
Duplicates 0
Seq-Fall 0
DSCP 46
L2Pri 12
RTCP 54
VLAN 1
DSCP 184
L2Pri 6
RTCP 62
Loss 0.0%
Loss 0.0% #0
Issue 1.1 June 2005
54
#0
55
5 of 6
261