Configuration Example For Site A - Avaya G250 Administration

- Serial - 2.2.2.1
- S8300 - 149.49.54.81
- G350 PMI - 149.49.54.82
Site B contains four IP phones and a G350 with S8300 and one MM340 media module. The
MM340 media module connects the G350 to the WAN via a two-timeslot (128Kbps) T1
interface. The following are the connection details for Site B:
IP phone are configured with DSCP tagging:
●
- Voice = DSCP 46
- Voice control = DSCP 34
The default RTP UDP port range is 2048 to 3028.
●
Network IPs (24 bit subnet masks):
●
- IP phones - 3.3.3.0 (VLAN 1)
- Data - 33.33.33.0 (VLAN 2)
- Serial - 2.2.2.2
- S8300 - 4.4.4.10
- G350 PMI - 4.4.4.11

Configuration Example for Site A

The following is the procedure for configuring PPP VoIP on the G350 at Site A. Commands with
footnotes are described at the end of the configuration procedure.
Loopback and PMI interfaces configuration:
●
G350-001# interface Loopback 1
G350-001(if:Loopback 1)# ip address 149.49.54.82 24
Done!
G350-001(if:Loopback 1)# pmi
The Primary management interface has changed. Please copy the running configuration
to the start-up configuration file, and reset the device.
G350-001(if:Loopback 1)# exit
G350-001# copy running-config startup-config
G350-001# reset
WAN configuration example
Issue 1.1 June 2005 189