Composite Operations; Overview Of Composite Operations; Pre-Configured Composite Operations For Access Control Lists - Avaya G250 Administration

Composite operations

This section describes composite operations and includes the following topics:

Overview of composite operations

●
are used

Pre-configured composite operations for access control lists

●
the pre-configured composite operations that you can use in access control list rules
Pre-configured composite operations for QoS lists
●
pre-configured composite operations that you can use in QOS list rules
Configuring composite operations
●
operations
Composite operation example
●
attaching it to a rule
Overview of composite operations
A composite operation is a set of operations that the G250/G350 can perform when a rule
matches a packet. Every rule in a policy list has an operation field that specifies a composite
operation. The operation field determines how the G250/G350 handles a packet when the rule
matches the packet.
There are different composite operations for access control list rules and QoS list rules. For
each type of list, the G250/G350 includes a pre-configured list of composite operations. You
cannot change or delete pre-configured composite operations. You can define additional
composite operations.
Pre-configured composite operations for access control lists
The following table lists the pre-configured entries in the composite operation table for rules in
an access control list:
No
0
1
2
3
4
— an overview of composite operations and how they
— instructions on how to configure additional composite
— an example of configuring a composite operation and
Name Access
Permit forward
Deny deny
Deny-Notify deny
Deny-Rst deny
Deny-Notify-Rst deny
— a list and descriptions of
— a list and descriptions of the
Notify Reset Connection
no trap no reset
no trap no reset
trap all no reset
no trap reset
trap all reset
Issue 1.1 June 2005
Composite operations
457