Avaya G250 Administration page 485

Table 25: Physical and logical interfaces on the G250 front panel (continued)
Physical Quantity
interface
Analog Line 2
Analog 4
Trunk
CONSOLE 1
USB 1
Media 2
Module
connectors
(V1 and V2)
Description
Analog telephone ports
on the integrated
analog media module
Analog telephone ports
on the integrated
analog media module
Console port for direct
connection of CLI
console.
RJ-45 connector.
USB port
Slots for inserting
optional Media
Modules
FIPS 140-2 logical
interface
Analog
●
phones
Data input
●
Data output
●
Power input
●
Analog
●
phone trunks
Data input
●
Data output
●
Power input
●
Control
●
inputs
Status output
●
Control
●
inputs
Status output
●
Data input
●
Data output
●
Status output
●
Control input
●
Overview
Comments
Line 2 ceases to be a data
input/output from the
module and is directly
connected to Analog
Trunk, providing a power
interface when an
emergency state occurs:
Power failure
●
Failure to
●
communicate with a
call controller
Firmware error
●
state
The Trunk ceases to be a
data input/output from the
module and is directly
connected to Analog
Line 2, providing a power
interface when an
emergency state occurs:
Power failure
●
Failure to
●
communicate with a
call controller
Firmware error
●
state
Supports cryptographic
module administration
Supports cryptographic
modem dial-in connection.
Disabled in
FIPS-approved mode.
Provides the ability to
communicate using Voice
TDM, Serial/TDM Data,
Ethernet, PCI, CPU Bus,
and facilitates power
2 of 3
Issue 1.1 June 2005 485