Avaya G250 Administration page 158

Configuring WAN interfaces
The command sequence is as follows:
!Step 1
G250-001(super-if:Loopback 1)# exit
G250-001(super)# interface loopback 1
G250-001(super-if:Loopback 1)# ip address 149.49.4.5 255.255.255.252
Done!
G250-001(super-if:Loopback 1)# exit
G250-001(super)#
!Step 2
G250-001(super)# ip access-control-list 305
G250-001(super-ACL 305)# name "Block-RTP-to_Modem-bkp"
Done!
G250-001(super-ACL 305)# ip-rule 20
G250-001(super-ACL 305/ip rule 20)# composite-operation "Deny"
Done!
G250-001(super-ACL 305/ip rule 20)# ip-protocol udp
Done!
G250-001(super-ACL 305/ip rule 20)# dscp 46
Done!
G250-001(super-ACL 305/ip rule 20)# description "Block-VoIP-Bearer"
Done!
G250-001(super-ACL 305/ip rule 20)# exit
G250-001(super-ACL 305)# exit
G250-001(super)#
!Steps 3-10 (Each command is an individual step)
G250-001(super)# interface loopback 1
G250-001(super-if:Loopback 1)# ip address 149.49.4.5 255.255.255.252
Done!
G250-001(super-if:Loopback 1)# exit
G250-001(super)# interface Dialer 1
G250-001(super-if:Dialer 1)# ppp chap hostname "area5"
Done!
G250-001(super-if:Dialer 1)# dialer persistent initial delay 5
Done!
G250-001(super-if:Dialer 1)# dialer persistent delay 5
Done!
G250-001(super-if:Dialer 1)# dialer string 1 3035384867
Done!
G250-001(super-if:Dialer 1)# dialer string 2 7325213412
Done!
G250-001(super-if:Dialer 1)# dialer modem-interface console
Done!
G250-001(super-if:Dialer 1)# ip unnumbered 1 Loopback 1
Done!
G250-001(super-if:Dialer 1)# ip access-group 305 out
Done!
G250-001(super-if:Dialer 1)# exit
G250-001(super)#
158 Administration for the Avaya G250 and Avaya G350 Media Gateways