FIPS
For the G250:
●
G250-N(super)# dir
M# file
-- ----
10 startup-config
10 running-config
10 G250- A
10 G250-B
10 G250-Booter
10 sniffer
10 phone-ScriptA
10 phone-ScriptB
10 phone-ImageA
10 phone-ImageB
10 phone-ImageC
10 phone-ImageD
10 dhcp-binding
8. Verify the successful completion of the power-up self-tests.
- Use the show self-test-status command.
G350-N(super)# show self-test-status
Device successfully passed the power-up self test sequence.
9. If a more recent FIPS-approved G250/G350 image is available, download it using the image
download procedures.
- Use the copy tftp image command.
10. If it has not yet been installed, download the Avaya License file with the VPN feature
activated.
- Use the copy tftp license-file command.
11. Reset the gateway.
- Use the reset command and confirm the reset operation.
G350-N(super)# reset
This command will reset the device
*** Reset the device *** - do you want to continue (Y/N)? y
Resetting the device...
G350-N(super)#
514 Administration for the Avaya G250 and Avaya G350 Media Gateways
ver num
file type
--------
----------
N/A
Startup Conf Nv-Ram
N/A
Running Conf Ram
24.x.y
SW Component Flash Bank A
24.x.y
SW RT Image
24.x.y
SW BootImage Nv-Ram
N/A
Other
N/A
Phone Script Nv-Ram
N/A
Phone Script Nv-Ram
N/A
Phone Image
N/A
Phone Image
N/A
Phone Image
N/A
Phone Image
N/A
DHCP Binding Nv-Ram
file location
file description
-------------
----------------
Startup Config
Running Config
Software Image Bank A
Flash Bank B
Software Image Bank B
Booter Image
Ram
Sniffer Capture
N/A
N/A
Ram
N/A
Ram
N/A
Ram
N/A
Ram
N/A
Ip Address Binding