Avaya G250 Administration page 176

Configuring WAN interfaces
5. If you specified a Threshold method of calculation in step 1, use the threshold count
command to enter the threshold values. For example, to specify that:
the state of the object tracker will change from down to up if 2 or more hosts are up, and
●
the state of the object tracker will change from up to down if 1 or less hosts are up:
●
G350-001(config-track list 10)# threshold count up 2 down 1
Done!
Note:
Object trackers operate indefinitely once they are defined. To stop the operation
Note:
of an object tracker, use the no track command to delete the object tracker.
Figure 18 illustrates the workflow for configuring RTR and object tracking.
Figure 18: Object tracking configuration workflow
rtr
type
frequency
dscp
next-hop
source-address
wait-interval
fail-retries
success-retries
rtr-schedule
track id rtr
description
track id list
description
object 1
.
.
object n
threshold count
176 Administration for the Avaya G250 and Avaya G350 Media Gateways