Showing Contact Closure Status - Avaya G250 Administration

To activate contact closure manually, use the set contact-closure admin command with
the parameter manual-trigger. In the following example, the command activates contact
closure in relay 1 of the Avaya Partner Contact Closure Adjunct. Contact closure remains active
until you deactivate it by using the set contact-closure admin command with the
parameter manual-off or mgc.
set contact-closure admin 10/1:1 manual-trigger
To deactivate contact closure manually, use the set contact-closure admin command
with the parameter manual-off. In the following example, the command deactivates contact
closure in relay 2 of the Avaya Partner Contact Closure Adjunct. Contact closure will not
operate, even automatically, until you use the set contact-closure admin command to
change the status of contact closure to mgc or manual-trigger.
set contact-closure admin 10/1:2 manual-off

Showing contact closure status

Use the show contact-closure command to display the status of one or more contact
closure relays. The following example displays the contact closure status of relay 1 of the Avaya
Partner Contact Closure Adjunct box.
G350-101(super)# show contact-closure
MODULE PORT
------- -----
10 1
10 1
RELAY ADMIN
------ ----------------
1 mgc
2 mgc
Showing contact closure status
PULSE DURATION (secs)
--------------------- ------
5 secs
3 secs
Issue 1.1 June 2005
STATUS
off
off
217