Ip-Rule Default Context - Avaya G250 Administration

Table 19: Packet sniffing CLI commands in ip-rule context (continued)
Command
udp source-port any
|{eq|lt|gt
port-name|port-number|{range
start-port end-port}}
not udp source-port eq|lt|gt
port-name|port-number|{range
start-port end-port}
udp destination-port any
|{eq|lt|gt
port-name|port-number|{range
start-port end-port}}
not udp destination-port
eq|lt|gt
port-name|port-number|{range
start-port end-port}
[not] icmp name|{icmp-type
icmp-code}
dscp dscp
not dscp
Show ip-rule [all|rule-id]

Ip-rule default context

Table 20: Packet sniffing CLI commands in ip-rule default context
Command
composite-operation
name
Show ip-rule
[all|rule-id]
Configuring and analyzing packet sniffing
Description
Set 'ip-protocol' to UDP and an
equation on the source port
(eq=Equal, lt=Lesser,
gt=Greater). The 'not' operator
only affects the port section.
Set 'ip-protocol' to UDP and an
equation on the destination port
(eq=Equal, lt=Lesser,
gt=Greater). The 'not' operator
only affects the port section.
Set 'ip-protocol' to ICMP and an
equation on the types of ICMP
messages. The 'not' operator
only affects the ICP message
type.
Specify the DSCP value to be set
by the current IP rule
Show all rules or a specified rule
Description
Set the default rule action
Shows the default rule
User Level
R/W
R/W
R/W
R/W
R/W
2 of 2
User Level
R/W
R/W
Issue 1.1 June 2005 303