Avaya G250 Administration page 175

To configure a simple object tracker:
1. Use the track id rtr command to specify the RTR to be tracked. Enter a number
between 1-50 as the unique ID for this object tracker.
G250-001(config)# track 1 rtr 5
G250-001(config-track rtr 1)#
2. Use the description command to enter a description for the object tracker.
G250-001(config-track rtr 1)# description "track rtr-5"
Done!
To configure a track list:
1. Use the track id list command to enter track list configuration mode, to specify the
unique ID of the track list (between 1-50), and to specify how to calculate the state of the
track list. The calculation can be either a Boolean or a Threshold calculation.
Note:
If you do not specify how to calculate the state of the track list, it is calculated by
Note:
default using the Boolean AND argument. This means that the list is up if all
objects are up, and down if one or more of the objects are down.
G350-001(config)# track 10 list boolean or
G350-001(config-track list 10)#
Or
G350-001(config)# track 10 list threshold count
G350-001(config-track list 10)#
2. Use the description command to enter a description for the track list.
G350-001(config-track list 10)# description "track list rtr-5 and rtr-6"
Done!
3. Use the object command to add an object tracker to the list.
Note:
The object tracker can be a simple one tracking a single RTR, or a track list.
Note:
G350-001(config-track list 10)# object 1
Done!
4. Repeat step 3 to add as many object trackers as you require, up to a maximum of 50.
Object tracking
Issue 1.1 June 2005 175