Avaya G250 Administration page 163

Table 8: Modem dial backup logging messages (continued)
Log Message
Dialer 1 string
<string_ID>
<dialer_string>
Dialer 1 timer
expired
Severity Possible cause
Informational The value of <string_ID> is
equal to the ID of the string
configured using the dialer
string command. The value of
<dialer_string> is equal to the
phone number associated with
the dialer string. For example, if
you configured dialer string 3 to
associate with the phone
number 5551314, and the
modem is attempting to connect
using dialer string 3, the
message received would be
Dialer 1 string 3
5551314.
Debug When the Dialer interface is
configured with the dialer
persistent re-enable command,
a timer is created. This timer
determines when the Dialer
interface attempts to begin
dialing again after a failure to
connect in as many attempts as
was configured in the dialer
persistent max-attempts
command. For example, if you
configured the value of dialer
persistent max-attempts as 10,
and dialer persistent re-enable
is configured for the Dialer
interface, after the dialer has
made 10 unsuccessful attempts
to connect to the remote
modem, the timer begins. When
the timer expires, the Dialer 1
timer expired message is sent,
and the dialer begins attempting
to connect to the remote modem
again.
Modem dial backup
Action
None required.
None required.
2 of 6
Issue 1.1 June 2005 163