Avaya G250 Administration page 535

Name Parameters
(MIB variables)
createSW soft
Redundancy Redundancy
Trap Status
lseIntPortCAMLa lseIntPortCAML
stChange astChange
Trap
duplicateIP ipNetToMediaPh
Trap ysAddress,
ipNetToMediaNe
tAddress
lntPolicy ipPolicy
ChangeEvent Activation
EntID, ipPolicy
ActivationList,
ipPolicy
Activationif
Index, ipPolicy
ActivationSub
Context
Class Msg Severity
Facility
P330 SWITCH Info
FABRIC
P330 SWITCH Info
FABRIC
P330 ROUTER Warning
P330 POLICY Info
Trap Name/ Format
Mnemonic
createSWRedu Software
ndancyTrap Redundancy $1
definition created
lseIntPort CAM Change at
CAMLast $1
Change
Trap
duplicateIPTrap Duplicate IP
address $2
detected; MAC
address $1
lntPolicyChang Module $1 - Active
eEvent policy list changed
to $2
Issue 1.1 June 2005
G250/G350 traps
Description
The trap is generated on
the creation of the
redundant links for the
specified ports. It gives
the logical name of the
redundant link the
identification of the main
and secondary ports and
the status of the link. The
softRedundancyId
defines the instances of
the above- mentioned
variables. The trap is
enabled/disabled by
chLntAgConfigChangeTr
aps.
This trap reports of the
occurred configuration
changes. It is enabled/
disabled by
chLntAgCAMChangeTra
ps.
This trap reports to the
Management station on
Duplicate IP
identification. CRP
identify the new IP on the
network. If it similar to
one of its IP interfaces,
the CRP will issue a
SNMP trap, containing
the MAC of the intruder.
The trap reports a change
in the active list specific
for a policy-enabled box
or module.
3 of 9
535