FIPS
Note:
Use the password "root" when the Media Gateway is running with the factory
Note:
default configuration.
Login: root
Password: ****
Password accepted
G350-N(super)#
2. Define the PMI (Primary Management Interface) interface, as follows.
G350-N(super)# interface vlan 1
G350-N(super-if:Vlan 1)# icc-vlan
Done!
G350-N(super-if:Vlan 1)# ip address 100.100.100.1 255.255.255.0
Done!
G350-N(super-if:Vlan 1)# pmi
To change the Primary Management Interface, copy the running
configuration to the start-up configuration file, and reset the device.
G350-N(super-if:Vlan 1)# exit
3. Save the running configuration to the startup configuration.
- Use the copy running-config startup-config command.
G350-N(super)# copy running-config startup-config
Beginning copy operation ..................... Done!
4. Reset the device to activate the PMI.
- Use the reset command and confirm the reset operation.
G350-N(super)# reset
This command will reset the device
*** Reset the device *** - do you want to continue (Y/N)? y
Resetting the device...
G350-N(super)#
5. Log in to the device through the local console port.
- User name: root
- Password: root
Login: root
Password: ****
Password accepted
G350-N(super)#
512 Administration for the Avaya G250 and Avaya G350 Media Gateways