Object Tracking Maintenance; Showing Rtr And Object Tracking Configuration; Viewing Rtr And Object Trackers Logging - Avaya G250 Administration

Object tracking maintenance

The following sections describe the commands you can use to display RTR and object tracking
configuration, and enable RTR and object tracking logging to a CLI terminal.

Showing RTR and object tracking configuration

You can use the following show commands to display RTR and Object Tracking configuration.
Use the show rtr configuration command to display RTR configuration values,
●
including all defaults, for a specific RTR operation or for all RTR operations.
Use the show rtr operational-state command to display the global operational
●
status of the RTR feature, for a specific RTR operation or for all RTR operations.
Use the show track command to display tracking information.
●

Viewing RTR and object trackers logging

To view RTR and object trackers logging to the CLI terminal:
1. Use the set logging session enable command to enable logging to the CLI terminal.
G350-001# set logging session enable
Done!
CLI-Notification: write: set logging session enable
2. Use the set logging session condition saa command to view all RTR messages
of level Info and above.
G350-001# set logging session condition saa Info
Done!
CLI-Notification: write: set logging session condition saa Info
3. Use the set logging session condition tracker command to view all object
tracker messages of level Info and above.
G350-001# set logging session condition tracker Info
Done!
CLI-Notification: write: set logging session condition tracker Info
Object tracking
Issue 1.1 June 2005 177