Chapter 6: Configuring Ethernet ports
This chapter provides information about configuring Ethernet ports on the Avaya G250 and
G350 Media Gateways and contains the following sections:
Ethernet ports on the G250
●
Ethernet ports on the G350
●
Configuring switch Ethernet ports
●
G250 and G350 switches
Configuring the WAN Ethernet port
●
on the G250 and G350 routers
Configuring DHCP client
●
Ethernet interface, for support of dynamic IP addressing
Configuring LLDP
●
on Ethernet interfaces, to enable LLDP advertisements
Ethernet ports on the G250
The switch on the Avaya G250 Media Gateway has the following Ethernet ports:
Eight 10/100 mbps fixed switch ports on the front panel (ports 10/3 - 10/10)
●
The router on the Avaya G250 Media Gateway has the following Ethernet port:
The 10/100 mbps fixed router port on the front panel (port 10/2)
●
Use a standard network cable when you connect one of the following devices to the fixed router
port:
WAN endpoint device
●
Switch
●
Router
●
Use a crossover network cable when you connect a computer or other endpoint device to the
fixed router port. For the other Ethernet ports on the G250, you can use either a standard
network cable or a crossover network cable to connect any device.
— a description of the Ethernet ports on the G250
— a description of the Ethernet ports on the G350
— instructions on how to configure Ethernet ports on the
— instructions on how to configure the Ethernet port
— instructions on how to configure DCHP client on the Fast
— instructions on how to configure LLDP on the G250 and G350, and
Issue 1.1 June 2005
91