Spanning Tree Configuration Examples - Avaya G250 Administration

Configuring advanced switching

Spanning tree configuration examples

This section provides spanning tree configuration examples.
The following example enables spanning tree on a port:
G350-003(super)# set port spantree enable 6/8
port 6/8 was enabled on spantree
The following example disables spanning tree on a port:
G350-003(super)# set port spantree disable 6/8
port 6/8 was disabled on spantree
The following example configures the version of the spanning tree default path cost used by this
bridge:
350-003(super)# set spantree default-path-cost common-spanning-tree
Spanning tree default path costs is set to common spanning tree.
GThe following example configures the time used when transferring the port to the forwarding
state:
G350-003(super)# set spantree forward-delay 16
bridge forward delay is set to 16.
The following example configures the time interval between the generation of configuration
BPDUs by the root:
G350-003(super)# set spantree hello-time 2
bridge hello time is set to 2.
The following example configures the amount of time an information message is kept before
being discarded:
G350-003(super)# set spantree max-age 21
bridge max age is set to 21.
The following example configures the bridge priority for spanning tree:
G350-003(super)# set spantree priority 36864
Bridge priority set to 36864.
The following example sets the value in packets used by spanning tree in order to limit the
maximum number of BPDUs transmitted during a hello-time period:
G350-003(super)# set spantree tx-hold-count 4
tx hold count is set to 4.
236 Administration for the Avaya G250 and Avaya G350 Media Gateways