Chapter 15: Configuring advanced switching
This chapter provides information about configuring advanced switching on the switch ports of
the Avaya G250 and G350 Media Gateways. In the G250, the switch ports are the ETH LAN
PoE ports located on the front panel. In the G350, the switch ports are located on the Avaya
MM314 media module.
This chapter contains the following sections:
Configuring VLANs
●
Configuring port redundancy (G350 only)
●
redundancy
Configuring port mirroring
●
Configuring spanning tree (G350 only)
●
Port classification
●
Configuring VLANs
This section contains information about VLAN configuration on the G250/G350's switch ports
and includes the following topics:
VLAN overview
●
VLAN tagging
●
Multi VLAN binding
●
VLANs per port
G250/G350 VLAN table
●
Ingress VLAN security
●
ICC-VLAN
●
VLAN CLI commands
●
VLANs in the G250/G350
VLAN configuration examples
●
VLANs in the G250/G350
— instructions on how to configure VLANs
— instructions on how to configure port mirroring
— instructions on how to configure port classification
— an overview of VLANs and how they can be used in a network
— an explanation of VLAN tagging
— an explanation of Multi VLAN binding, also known as Multiple
— an explanation of the G250/G350's VLAN table
— an explanation of the G250/G350's ingress security mechanism
— instructions on how to configure the ICC-VLAN
— a list and explanation of the CLI commands used to configure
— examples of how to use CLI commands to configure
— instructions on how to configure port
— instructions on how to configure spanning tree
Issue 1.1 June 2005
219