Avaya G250 Administration page 105

3. Optionally, define an output facility for the Syslog server by typing the set logging
server facility command, followed by the name of the output facility and the IP
address of the Syslog server. If you do not define an output facility, the default local7 facility
is used.
G350-001(super)# set logging server facility auth 147.2.3.66
Done!
The following is a list of possible facilities:
auth (Authorization)
daemon (Background System Process)
clkd (Clock Daemon)
clkd2 (Clock Daemon)
mail (Electronic Mail)
local0 – local7 (For Local Use)
ftpd (FTP Daemon)
kern (Kernel)
alert (Log Alert)
audi (Log Audit)
ntp (NTP Subsystem)
lpr (Printing)
sec (Security)
syslog (System Logging)
uucp (Unix-to-Unix Copy Program)
news (Usenet news)
user (User Process)
4. Optionally, limit access to the Syslog server output by typing the set logging server
access-level command, followed by an access level (read-only, read-write, or admin)
and the IP address of the Syslog server. If you do not define an access level, the default
read-write level is used.
G350-001(super)# set logging server access-level read-only 147.2.3.66
Done!
Only messages with the appropriate access level are sent to the Syslog output.
5. Optionally define filters to limit the types of messages received (see
filters on page 109).
To disable a Syslog server, type the set logging server disable command, followed by
the IP address of the Syslog server.
G350-001(super)# set logging server disable 147.2.3.66
Done!
Configuring a Syslog server
Configuring logging
Issue 1.1 June 2005 105