Syslog Message Format - Avaya G250 Administration

Configuring logging
To delete a Syslog server from the Syslog server table, type the clear logging server
command followed by the IP address of the Syslog server you want to delete.
G350-001(super)# clear logging server 147.2.3.66
Done!
To display the status of a Syslog server, type the show logging server condition
command, followed by the IP address of the Syslog server. If you do not specify an IP address,
the command displays the status of all Syslog servers defined for the G250/G350. As shown,
the command displays whether the server is enabled or disabled, and lists all filters defined on
the server.
G350-001(super)# show logging server condition 147.2.3.66
******************************************************
*** Message logging configuration of SYSLOG
Sink Is Enabled
Sink default severity: Warning
Server name: 147.2.3.66
Server facility: auth
Server access level: read-only
The Syslog sink has the following default settings:
Severity — warning
●
Facility — local 7
●
Access level — read-write
●

Syslog message format

Syslog messages are arranged chronologically and have the following format:
<34> Oct 11 22:14:15 host LINKDOWN SWICHFABRIC-Notification:Port 10/3 Link
The message provides the following information:
A priority (
●
severity level.
A header (
●
the hostname, and a message mnemonic.
A message (
●
application being logged, the severity level, and the message text.
106 Administration for the Avaya G250 and Avaya G350 Media Gateways
in this example), which is calculated based on the syslog facility and the
<34>
Oct 11 22:14:15 host LINKDOWN
SWICHFABRIC-Notification: Port 10/3 Link
sink ***
in this example), providing the date and time,
in this example), detailing the