Configuring Logging Filters - Avaya G250 Administration

To display how session logging is configured, type the show logging session condition
command. This command displays whether session logging is enabled or disabled, and lists all
filters defined for session logging.
G350-001(super)# show logging session condition
******************************************************
*** Message logging configuration of SESSION sink ***
Sink Is Enabled
Sink default severity: Warning
Session source ip: 172.16.1.231
Session logging message format
Session logging messages are arranged chronologically and have the following format:
01/18/2005,10:49:03:SWITCHFABRIC-Notification: Port Connection Lost on Module 10
port 8 was cleared
01/18/2005,10:55:09:CLI-Notification: root:
Each message provides the following information:
The date and time (if available)
●
The logging application
●
The severity level
●
The message text
●
Note:
The user enabling the log will only see entered commands with a user-level no
Note:
higher than the user's own privileges. For example, a user with read-write
privileges will not see entered commands having admin user level.

Configuring logging filters

You can use filters to reduce the number of collected and transmitted messages. The filtering
options are based on message classification by severity for each application. For a specified
sink, you can define the threshold severity for message output for each application. Messages
pertaining to the specified applications, that have a severity stronger than or equal to the
defined threshold, are sent to the specified sink. Messages with a severity weaker than the
defined threshold are not sent.
Configuring logging filters
set port disable 10/9
Issue 1.1 June 2005 109