Configuring policy
To create or edit a QoS list, type ip qos-list, followed by a list number in the range 400-499.
The G250/G350 includes one pre-configured QoS list. The pre-configured QoS list is list
number 400. To create a new QoS list, type:
ip qos-list 401
Once you have entered the list context, you can perform the following actions:
Configure rules — see
●
Configure composite operations — see
●
Configure DSCP mapping (QoS lists only) — see
●
Defining list identification attributes
The following policy list attributes are used by Avaya QoS Manager software to identify policy
lists:
Name
●
Owner
●
Cookie
●
To define these attributes:
1. Enter the context of the policy list in which you want to define the attribute.
2. Enter one of the following commands, followed by a text string or integer:
- name — defines a list name (text string). The default value is owner.
- owner — defines a list owner (text string). The default value is list#<listnumber>.
- cookie — defines a list cookie (integer). The Avaya QoS Manager uses the cookie
attribute internally. Normally, you should not change this attribute.
To set a policy list attribute to its default setting, use the no form of the appropriate command.
For example, to set a list to its default name, use the command no name.
To view the attributes, use the show list command in the context of the list.
446 Administration for the Avaya G250 and Avaya G350 Media Gateways
Defining rules
on page 450
Composite operations
on page 457
DSCP table
on page 460