Avaya G250 Administration page 385
Media gateway
Hide thumbs
Also See for G250:
- Administration manual (840 pages) ,
- Reference (812 pages) ,
- Administration (720 pages)
Table of Contents
Advertisement
2. Use the set logging session condition ISAKMP command to view all ISAKMP
messages of Info level and above.
G350-001# set logging session condition ISAKMP Info
Done!
CLI-Notification: write: set logging session condition ISAKMP Info
3. Use the set logging session condition IPSEC command to view all IPSec
messages of Info level and above.
G350-001# set logging session condition IPSEC Info
Done!
CLI-Notification: write: set logging session condition IPSEC Info
4. Initiate a session, for example by pinging the peer device.
G350-001# ping 135.64.102.109
The logging information will detail the IKE negotiations, including the ISAKMP SA and IPSec SA
configuration of the peers. For example:
IPSEC-Informational: Call IKE negotiation for outgoing SPD entry 901_20:
Peers 149.49.77.202<->135.64.102.109
ISAKMP-Informational: Initiating IKE phase 1 negotiation:
Peers 149.49.77.202<->135.64.102.109
ISAKMP-Informational: Finished IKE phase 1 negotiation, creating ISAKMP
SA:
Peers 149.49.77.202<->135.64.102.109
Icookie - 0e2fb5ac12ec04b2, Rcookie - 541b912b0a30085d
esp-des, esp-sha-hmac, DH group 1, Lifetime 86400 seconds
ISAKMP-Informational: Initiating IKE phase 2 negotiation:
Peers 149.49.77.202<->135.64.102.109
ISAKMP-Informational: Finished IKE phase 2, creating outbound IPSEC SA:
SPI 0x4d706e3, Peers 149.49.77.202<->135.64.102.109
Identities: 149.49.77.0/255.255.255.0->135.64.102.0/255.255.255.0
esp-des, esp-md5-hmac, 3600 seconds, 4608000 KB
ISAKMP-Informational: Finished IKE phase 2, creating inbound IPSEC SA:
SPI 0x6798, Peers 135.64.102.109<->149.49.77.202
Identities: 135.64.102.0/255.255.255.0->149.49.77.0/255.255.255.0
esp-des, esp-md5-hmac, 3600 seconds, 4608000 KB
IPSec VPN maintenance
Issue 1.1 June 2005
385
Advertisement
Table of Contents
