General Context - Avaya G250 Administration

Configuring monitoring applications

General context

Table 17: Packet sniffing CLI commands in general context
Command
Capture start
Capture stop
clear capture buffer
[no] capture-service
Capture max-frame-size
max-frame-size
no capture max-frame-size
Capture filter-group
capture-list-id
no capture filter-group
Capture buffer-mode
non-cyclic|cyclic
capture buffer-size
buffer-size-KB
no capture buffer-size
Capture-e-vlan
no capture-e-vlan
show capture
Show capture-buffer hex
[frame-number]
ip capture-list
capture-list-id
no ip capture-list
capture-list-id
Show ip capture-list
[capture-list-id|all
[detailed]]
300 Administration for the Avaya G250 and Avaya G350 Media Gateways
Description
Start capturing packets
Stop capturing packets
Clear the capture buffer (useful in
case it holds sensitive information)
Enable/disable the capture service
Set the maximum octets that are
captured from each frame
Activate a capture list
Set the capture buffer to cyclic mode
Change the size of the capture file
Enable capture of the internal VLAN
Show the sniffer status
Show a hex-dump of the captured
frames, starting from frame
<frame-number>
Enter the capture list configuration
context
Delete a capture list
Show capture list(s)
User Level
R/W
R/W
R/W
Admin
R/W
R/W
R/W
R/W
Tech
R/O
R/O
R/W
R/W
R/O
1 of 2