Tftp Ip Telephone Upgrade Examples - Avaya G350 Installing And Upgrading

Upgrading IP phone configuration and firmware files
6. Copy the script files for the IP phone family.
- To copy from the remote FTP/SCP/TFTP server, use one of the following commands:
●
●
●
- To copy from the USB device, insert the USB device into the G350 USB port and copy
the files to the resident TFTP server using the copy usb phone-script command.
7. Copy the boot image files for up to two IP phone types.
- To copy from the remote FTP/TFTP server, use either the copy ftp phone-image
command or the copy tftp phone-image command for each IP phone type.
- To copy from the USB device, insert the USB device into the G350 USB port and copy
the files to the resident TFTP server using the copy usb phone-image command
8. Copy the phone application image files for up to two IP phone types.
- To copy from the remote FTP/TFTP server, use either the copy ftp phone-image
command or the copy tftp phone-image command for each IP phone type.
- To copy from the USB device, insert the USB device into the G350 USB port and copy
the files to the resident TFTP server using the copy usb phone-image command.
9. Reset the phones and wait for the installation to be completed.
Note:
Once the upgrade procedure is complete, you can delete the files using the
Note:
erase phone-image command.

TFTP IP telephone upgrade examples

In the following example, 4602SW and 4602D phones, which use the same image files, are
upgraded first. Later, 4620 phones are upgraded. The script files are not copied for the second
upgrade, since they are already stored in NVRAM.
108 Installation and Upgrades for the Avaya G350 Media Gateway
copy scp phone-script
copy ftp phone-script
copy tftp phone-script