Snmp Configuration Examples - Avaya G430 Manual

SNMP configuration examples

The following example enables link up/down traps on an Ethernet interface:
Gxxx-001(super)# interface fastethernet 10/3
Gxxx-001(super-if:FastEthernet 10/3)# snmp trap link-status
Done!
The following example displays SNMP information:
Gxxx-001(super)# show snmp
Authentication trap disabled
Community-Access
----------------
read-only
read-write
SNMPv3 Notification Status
----------------------------
Traps: Enabled
Informs: Enabled
SNMP-Rec-Address Model
---------------- -----
149.49.70.137
UDP port: 162 DM
The following example disables Link Up and Link Down traps on an Ethernet interface:
Gxxx-001(super-if:FastEthernet 10/3)# no snmp trap link-status
Done!
The following example creates a read-only user:
Gxxx-001# snmp-server user joseph ReadOnlyG v3 auth md5 katmandu priv des56
ktamatan
The following example creates a read-write user:
Gxxx-001# snmp-server user johnny ReadWriteG v3 auth md5 katmandu priv des56 ktamatan
The following example creates an admin user:
Gxxx-001# snmp-server user johnny v3AdminG v3 auth md5 katmandu priv des56 ktamatan
The following example sets the SNMPv1 read-only community:
Gxxx-001(super)# set snmp community read-only read
SNMP read-only community string set.
The following example sets the SNMPv1 read-write community:
Gxxx-001(super)# set snmp community read-write write
SNMP read-write community string set.
The following example enables link up/down trap on a LAN port on the G250:
G250-001(super)# set port trap 10/3 enable
Port 10/3 up/down trap enabled
Administering Avaya G430 Branch Gateway
Community-String
----------------
*****
*****
Retries: 3
Level Notification
------ ------------
v1 noauth all
Timeout: 3 seconds
Trap/Inform
-----------
trap
SNMP
User name
----------
ReadCommN
October 2013 315