System Configuration
HP ProCurve 420/530 AP—See
■
Nortel—See
■
Other—See
■
7 Click ok.
Testing the Connection to a Device
The test connection area has different options based on the switch you select:
Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches—See
●
ProCurve, Nortel, Other switches—See
●
To test the connection to an 802.1X device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine method radio button
NOTE
You must have already added devices for them to appear in the 802.1X devices area. You can also test the device as
you add it.
1 In the 802.1X devices area, click edit next to the device you want to test. The 802.1X device window
appears. The Test connection to this device area is near the bottom of the window:
Figure 36: Add 802.1X Device, Test Connection Area Option 1
Figure 37: Add 802.1X Device, Test Connection Area Option 2
2 For ProCurve, Nortel, Other switches
86
"HP ProCurve 420 AP or HP ProCurve 530 AP" on page
"Nortel" on page
104.
"Other" on page
106.
(Figure
Figure
37.
36),:
Sentriant AG Software Users Guide, Version 5.3
102.
Figure
36.